Amplificator Auto 4 CH Alpine PDR-F50

Echipamentele de la Alpine va vor oferi intodeauna calitate superioara la un pret avantajos. Datorita tehnologiilor avansate si optiunilor cu care sunt dotate aceste echipamente veti utiliza la maxim sistemul audio din masina si nu numai.

Caracteristici:

Install
Angled Insert-Type Terminals
Integrated Wire and Mounting Screw Terminals
Terminal Layout: One-Sided
Mounting Design: Clean-look installation

General
Rotatable Illuminated Alpine Badge
Top-Side Control Panel
Amplifier Type: Class-D (Digital)
Channel Design: 4/3/2 Channel
Thermal Control : Thermal management control
Low-battery Protection
Power Supply: Resonant Mode Power Supply
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: STAR Circuit
Current Protection: Auto Over-Current Protection
Power Indicator: Top Mounted Blue LED Power/Status Indicator (Power: Blue, Status: Blue/Red)
Crossover: Adjustable Low-Pass/High-Pass
Pre-Amp Stage: Discrete
Final Outputs: MOSFET
Board Design: 6-Layer Glass Epoxy PC Board
Gain Control: Adjustable

Specificatii:

Max Power Output Ratings
Total Max Power: 1000W

RMS Power Ratings
Per channel into 4 Ohms: (@14.4V ≤1%THD+N) 85W x 4
Per channel into 2 Ohms: (@14.4V ≤1%THD+N) 125W x 4
Bridged into 4ohms, 14.4V(@14.4V ≤1%THD+N): 250W x 2

Sound Tuning
Crossover: Variable LPF, 50-400Hz (-12dB / oct )
Crossover: Variable HPF, 50-400Hz (-12dB / oct )
Equalizer (Bass EQ): 0 or +6 or +12dB (CH3/4, fc=50Hz) Selectable

Dimensions
Heat Sink (WxHxD) mm: 228.5mm x 165mm x 50.8mm

General
Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.2 - 4.0V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms): 8Hz - 45kHz
Frequency Response (+0, -1dB: 1W into 4 ohms): 10Hz - 30kHz
THD+N (10W into 4 ohms): ≤0.02%
THD+N (Rated Power into 4 ohms): ≤0.07%
Damping Factor (10W into 4 ohms at 100Hz): >500
Signal to Noise (Rated Power into 4 ohms): >106dB
Weight: 2.5kg